6ft. Shelf Kit

6ft. Shelf Kit
In stock
Only %1 left
As low as $111.15 Regular Price $171.00
Adding additional shelving to your home is easy with the 6ft Shelf Kit from John Louis Home. Whether it’s mounted between sidewalls or free-floating, we’ve taken the guesswork out by including all the hardware you need for installation. Because it’s made of Solid Wood, it can easily be cut to fit your exact dimensions. Add to your existing organizer or anywhere in the home for decorative and utility shelving.
  • Available in Honey Maple, Red Mahogany, Espresso, Chestnut, or White finish
  • 100% Solid Wood
  • 12in. or 16in. shelf depth
  • Ventilated for airflow
  • Cut to fit desired length
  • Can be installed into side walls or free-floating
  • Use in closet, pantry, linen, bedroom, laundry & more
  • One 6ft. shelf
  • Two Angle Brackets.
  • Four Metal Shelf Mounting L-Clip Brackets
  • Two Metal Shelf End Brackets
  • All Required Hardware & Fasteners
  • Installation Instructions
  • One Year Manufacturers Limited Warranty
  • Shelf Depth: 12in. or 16in.
  • Shelf Height: 1.75in.
  • Shelf Width: 72in.
  • Slat Depth: 10in.
  • Slat Width: 1in.
  • Slat Spacing: .50in.
  • Rail Depth: 1in.
  • Rail Height: 1.75in.
  • Rail Width: 72in.
  • Product Weight: 14lbs or 16lbs.
  • Supported Weight: 25lbs per lineal ft.

4ft. & 6ft. Shelf Kit Installation

How To Install Shelving In Corners Installation

Click to open and download PDF file of installation instructions.

Q. Can the Shelf Kit be free-floating on either or both sides?

A. Yes, the Shelf Kit can be free-floating by using the provided curved wooden angle brackets. These angle brackets provide support to the shelf if not installed into a side wall.

Q. Can the Shelf Kit be cut-to-size?
A. Yes, the Shelf Kit can be cut-to-size by using a fine-toothed saw blade. For best results, we recommend using a table saw or sliding miter saw.

Q. Can Garment Bars be added to the Shelf Kit?
A. Yes, Garment Bars can be added to the Shelf Kit. Our 4ft. and 6ft. Bar Kits are sold with all the hardware needed to install directly to the Shelf Kit.

Q. Can Shelf Kits be installed in a 90-degree corner?
A. Yes, Shelf Kits can be installed in a corner at a 90-degree angle. One shelf (A) is installed onto the back wall and side wall. The other shelf (B) is installed to the perpendicular wall and secured to the front of shelf (A) using the included Shelf End Hardware.

Q. Can Shelf Kits be installed on brick or plaster?
A. John Louis Home shelving is designed for installation on current specifications and methods of wood studding and drywall. While the Shelf Kit can be installed on alternative wall types, custom wall preparation and hardware will be required.

Q. What if my cut measurement is in the middle of a shelf slat?
A. There are two solutions to this. One – The size of the included Shelf End Hardware allows for short cuts; therefore, you may cut at the nearest slat side of your measurement. Two – Make your cut using a fine-toothed straight handsaw and place the cut slat side facing the sidewall.

Q. What accessories can be added to the Shelf Kit?
A. Our Pull-Out Pant Rack and Under-Mount Belt & Tie Rack can be installed directly under the Shelf Kit.

Q. Will the solid wood warp?
A. To prevent warping, John Louis Home uses only quality kiln-dried wood. The wood is treated and the multi-layered finish process blocks moisture intake. As with any natural product, warping may occur when used in areas that contain overly excessive amounts of moisture.

Write Your Own Review
You're reviewing:6ft. Shelf Kit
Your Rating