Angle Bracket 2-Pack
- Available in Espresso finish
- 100% Solid Wood
- 12in. or 16in. depth
- Provides support for front underside of shelf
- Use along with J-Hook bracket for metal Garment Bar installation
- Includes mushroom cap covers to conceal installation hardware
- Curved design for discreet styling
- Rounded edges
- Two 12in. or 16in. Angle Brackets
- All Required Hardware & Fasteners
- Installation Instructions
- One Year Manufacturer’s Limited Warranty
- Depth: 12in. or 16in.
- Height: 8in. or 11in. (From lowest point on wall to underside of shelf)
- Thickness: 1.25in
- Product Weight: 2 lbs. (Both brackets)
Click to open and download PDF file of installation instructions.
Q. What are the Angle Brackets made of?
A. The Angle Brackets are made of 100% solid wood.
Q. What are the uses for the Angle Brackets?
A. The Angle Brackets are used with John Louis Home shelving to provide support to the front end of the shelf. This is important when the shelves are longer than 4ft or will be free-floating on either or both ends. The Angle Brackets are also the point of contact for the Garment Bar Kit installation.
Q. How many Angle Brackets are needed with the shelving?
A. John Louis Home recommends that two Angle Brackets are used for 4ft. and 6ft. shelving, three Angle Brackets for 7ft. shelving, and four Angle Brackets for 8ft. shelving. The Angle Brackets should be evenly spaced to properly distribute the weight.
Q. Are Angle Brackets needed if the shelf is connected to walls on both sides?
A. Angle Brackets are needed on shelves connected to walls on both sides if the shelf is longer than 4ft, or if a Garment Bar is going to be installed.
Q. Do the Angle Brackets connect to the shelf?
A. No. The design allows the Angle Bracket to fit snugly under the front lip of the shelf and does not need to be drilled together directly. If desired, you can run a screw through the top slat of the shelf down into the Angle Bracket for additional support.
Q. What is the proper distance from the end of a shelf to mount an Angle Bracket?
A. At a minimum, the Angle Bracket should be placed 6in. from each side of the shelf.
